irext/iris-kit
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

renamed source code and completed iris kit auth procedure

Browse Source
This commit is contained in:
strawmanbobi
2024-01-09 12:33:59 +08:00
parent 6f0e949830
commit 34259c8023
686 changed files with 171 additions and 105038 deletions
Download Patch File Download Diff File Expand all files Collapse all files

271
lib/IRremoteESP8266/examples/IRrecvDumpV2/IRrecvDumpV2.ino
View File

@@ -1,271 +0,0 @@
/*
* IRremoteESP8266: IRrecvDumpV2 - dump details of IR codes with IRrecv
* An IR detector/demodulator must be connected to the input kRecvPin.
*
* Copyright 2009 Ken Shirriff, http://arcfn.com
* Copyright 2017 David Conran
*
* Example circuit diagram:
* https://github.com/markszabo/IRremoteESP8266/wiki#ir-receiving
*
* Changes:
* Version 0.4 July, 2018
* - Minor improvements and more A/C unit support.
* Version 0.3 November, 2017
* - Support for A/C decoding for some protcols.
* Version 0.2 April, 2017
* - Decode from a copy of the data so we can start capturing faster thus
* reduce the likelihood of miscaptures.
* Based on Ken Shirriff's IrsendDemo Version 0.1 July, 2009,
*/
#ifndef UNIT_TEST
#include <Arduino.h>
#endif
#include <IRrecv.h>
#include <IRremoteESP8266.h>
#include <IRutils.h>
// The following are only needed for extended decoding of A/C Messages
#include <ir_Coolix.h>
#include <ir_Daikin.h>
#include <ir_Fujitsu.h>
#include <ir_Gree.h>
#include <ir_Haier.h>
#include <ir_Hitachi.h>
#include <ir_Kelvinator.h>
#include <ir_Midea.h>
#include <ir_Mitsubishi.h>
#include <ir_Panasonic.h>
#include <ir_Samsung.h>
#include <ir_Toshiba.h>
#include <ir_Whirlpool.h>
// ==================== start of TUNEABLE PARAMETERS ====================
// An IR detector/demodulator is connected to GPIO pin 14
// e.g. D5 on a NodeMCU board.
const uint16_t kRecvPin = 14;
// The Serial connection baud rate.
// i.e. Status message will be sent to the PC at this baud rate.
// Try to avoid slow speeds like 9600, as you will miss messages and
// cause other problems. 115200 (or faster) is recommended.
// NOTE: Make sure you set your Serial Monitor to the same speed.
const uint32_t kBaudRate = 115200;
// As this program is a special purpose capture/decoder, let us use a larger
// than normal buffer so we can handle Air Conditioner remote codes.
const uint16_t kCaptureBufferSize = 1024;
// kTimeout is the Nr. of milli-Seconds of no-more-data before we consider a
// message ended.
// This parameter is an interesting trade-off. The longer the timeout, the more
// complex a message it can capture. e.g. Some device protocols will send
// multiple message packets in quick succession, like Air Conditioner remotes.
// Air Coniditioner protocols often have a considerable gap (20-40+ms) between
// packets.
// The downside of a large timeout value is a lot of less complex protocols
// send multiple messages when the remote's button is held down. The gap between
// them is often also around 20+ms. This can result in the raw data be 2-3+
// times larger than needed as it has captured 2-3+ messages in a single
// capture. Setting a low timeout value can resolve this.
// So, choosing the best kTimeout value for your use particular case is
// quite nuanced. Good luck and happy hunting.
// NOTE: Don't exceed kMaxTimeoutMs. Typically 130ms.
#if DECODE_AC
// Some A/C units have gaps in their protocols of ~40ms. e.g. Kelvinator
// A value this large may swallow repeats of some protocols
const uint8_t kTimeout = 50;
#else // DECODE_AC
// Suits most messages, while not swallowing many repeats.
const uint8_t kTimeout = 15;
#endif // DECODE_AC
// Alternatives:
// const uint8_t kTimeout = 90;
// Suits messages with big gaps like XMP-1 & some aircon units, but can
// accidentally swallow repeated messages in the rawData[] output.
//
// const uint8_t kTimeout = kMaxTimeoutMs;
// This will set it to our currently allowed maximum.
// Values this high are problematic because it is roughly the typical boundary
// where most messages repeat.
// e.g. It will stop decoding a message and start sending it to serial at
// precisely the time when the next message is likely to be transmitted,
// and may miss it.
// Set the smallest sized "UNKNOWN" message packets we actually care about.
// This value helps reduce the false-positive detection rate of IR background
// noise as real messages. The chances of background IR noise getting detected
// as a message increases with the length of the kTimeout value. (See above)
// The downside of setting this message too large is you can miss some valid
// short messages for protocols that this library doesn't yet decode.
//
// Set higher if you get lots of random short UNKNOWN messages when nothing
// should be sending a message.
// Set lower if you are sure your setup is working, but it doesn't see messages
// from your device. (e.g. Other IR remotes work.)
// NOTE: Set this value very high to effectively turn off UNKNOWN detection.
const uint16_t kMinUnknownSize = 12;
// ==================== end of TUNEABLE PARAMETERS ====================
// Use turn on the save buffer feature for more complete capture coverage.
IRrecv irrecv(kRecvPin, kCaptureBufferSize, kTimeout, true);
decode_results results; // Somewhere to store the results
// Display the human readable state of an A/C message if we can.
void dumpACInfo(decode_results *results) {
String description = "";
#if DECODE_DAIKIN
if (results->decode_type == DAIKIN) {
IRDaikinESP ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_DAIKIN
#if DECODE_FUJITSU_AC
if (results->decode_type == FUJITSU_AC) {
IRFujitsuAC ac(0);
ac.setRaw(results->state, results->bits / 8);
description = ac.toString();
}
#endif // DECODE_FUJITSU_AC
#if DECODE_KELVINATOR
if (results->decode_type == KELVINATOR) {
IRKelvinatorAC ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_KELVINATOR
#if DECODE_MITSUBISHI_AC
if (results->decode_type == MITSUBISHI_AC) {
IRMitsubishiAC ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_MITSUBISHI_AC
#if DECODE_TOSHIBA_AC
if (results->decode_type == TOSHIBA_AC) {
IRToshibaAC ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_TOSHIBA_AC
#if DECODE_GREE
if (results->decode_type == GREE) {
IRGreeAC ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_GREE
#if DECODE_MIDEA
if (results->decode_type == MIDEA) {
IRMideaAC ac(0);
ac.setRaw(results->value); // Midea uses value instead of state.
description = ac.toString();
}
#endif // DECODE_MIDEA
#if DECODE_HAIER_AC
if (results->decode_type == HAIER_AC) {
IRHaierAC ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_HAIER_AC
#if DECODE_HAIER_AC_YRW02
if (results->decode_type == HAIER_AC_YRW02) {
IRHaierACYRW02 ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_HAIER_AC_YRW02
#if DECODE_SAMSUNG_AC
if (results->decode_type == SAMSUNG_AC) {
IRSamsungAc ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_SAMSUNG_AC
#if DECODE_COOLIX
if (results->decode_type == COOLIX) {
IRCoolixAC ac(0);
ac.setRaw(results->value); // Coolix uses value instead of state.
description = ac.toString();
}
#endif // DECODE_COOLIX
#if DECODE_PANASONIC_AC
if (results->decode_type == PANASONIC_AC &&
results->bits > kPanasonicAcShortBits) {
IRPanasonicAc ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_PANASONIC_AC
#if DECODE_HITACHI_AC
if (results->decode_type == HITACHI_AC) {
IRHitachiAc ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_HITACHI_AC
#if DECODE_WHIRLPOOL_AC
if (results->decode_type == WHIRLPOOL_AC) {
IRWhirlpoolAc ac(0);
ac.setRaw(results->state);
description = ac.toString();
}
#endif // DECODE_WHIRLPOOL_AC
// If we got a human-readable description of the message, display it.
if (description != "") Serial.println("Mesg Desc.: " + description);
}
// The section of code run only once at start-up.
void setup() {
Serial.begin(kBaudRate, SERIAL_8N1, SERIAL_TX_ONLY);
while (!Serial) // Wait for the serial connection to be establised.
delay(50);
Serial.println();
Serial.print("IRrecvDumpV2 is now running and waiting for IR input on Pin ");
Serial.println(kRecvPin);
#if DECODE_HASH
// Ignore messages with less than minimum on or off pulses.
irrecv.setUnknownThreshold(kMinUnknownSize);
#endif // DECODE_HASH
irrecv.enableIRIn(); // Start the receiver
}
// The repeating section of the code
//
void loop() {
// Check if the IR code has been received.
if (irrecv.decode(&results)) {
// Display a crude timestamp.
uint32_t now = millis();
Serial.printf("Timestamp : %06u.%03u\n", now / 1000, now % 1000);
if (results.overflow)
Serial.printf(
"WARNING: IR code is too big for buffer (>= %d). "
"This result shouldn't be trusted until this is resolved. "
"Edit & increase kCaptureBufferSize.\n",
kCaptureBufferSize);
// Display the basic output of what we found.
Serial.print(resultToHumanReadableBasic(&results));
dumpACInfo(&results); // Display any extra A/C info if we have it.
yield(); // Feed the WDT as the text output can take a while to print.
// Display the library version the message was captured with.
Serial.print("Library : v");
Serial.println(_IRREMOTEESP8266_VERSION_);
Serial.println();
// Output RAW timing info of the result.
Serial.println(resultToTimingInfo(&results));
yield(); // Feed the WDT (again)
// Output the results as source code
Serial.println(resultToSourceCode(&results));
Serial.println(""); // Blank line between entries
yield(); // Feed the WDT (again)
}
}

17
lib/IRremoteESP8266/examples/IRrecvDumpV2/platformio.ini
View File

@@ -1,17 +0,0 @@
[platformio]
lib_extra_dirs = ../../
src_dir=.
[common]
build_flags =
lib_deps_builtin =
lib_deps_external =
[env:nodemcuv2]
platform = espressif8266
framework = arduino
board = nodemcuv2
build_flags = ${common.build_flags}
lib_deps =
${common.lib_deps_builtin}
${common.lib_deps_external}