757 lines
23 KiB
C
757 lines
23 KiB
C
/**************************************************************************************************
|
|
Filename: thermometerService.c
|
|
Revised: $Date: 2013-05-06 13:33:47 -0700 (Mon, 06 May 2013) $
|
|
Revision: $Revision: 34153 $
|
|
|
|
Description: This file contains the Simple BLE Peripheral sample application
|
|
for use with the CC2540 Bluetooth Low Energy Protocol Stack.
|
|
|
|
Copyright 2011 - 2013 Texas Instruments Incorporated. All rights reserved.
|
|
|
|
IMPORTANT: Your use of this Software is limited to those specific rights
|
|
granted under the terms of a software license agreement between the user
|
|
who downloaded the software, his/her employer (which must be your employer)
|
|
and Texas Instruments Incorporated (the "License"). You may not use this
|
|
Software unless you agree to abide by the terms of the License. The License
|
|
limits your use, and you acknowledge, that the Software may not be modified,
|
|
copied or distributed unless embedded on a Texas Instruments microcontroller
|
|
or used solely and exclusively in conjunction with a Texas Instruments radio
|
|
frequency transceiver, which is integrated into your product. Other than for
|
|
the foregoing purpose, you may not use, reproduce, copy, prepare derivative
|
|
works of, modify, distribute, perform, display or sell this Software and/or
|
|
its documentation for any purpose.
|
|
|
|
YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
|
|
PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
|
|
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE,
|
|
NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
|
|
TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
|
|
NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
|
|
LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
|
|
INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE
|
|
OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT
|
|
OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
|
|
(INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
|
|
|
|
Should you have any questions regarding your right to use this Software,
|
|
contact Texas Instruments Incorporated at www.TI.com.
|
|
**************************************************************************************************/
|
|
|
|
/*********************************************************************
|
|
* INCLUDES
|
|
*/
|
|
#include "bcomdef.h"
|
|
#include "OSAL.h"
|
|
#include "linkdb.h"
|
|
#include "att.h"
|
|
#include "gatt.h"
|
|
#include "gatt_uuid.h"
|
|
#include "gattservapp.h"
|
|
#include "gapbondmgr.h"
|
|
#include "thermometerservice.h"
|
|
|
|
/*********************************************************************
|
|
* MACROS
|
|
*/
|
|
|
|
/*********************************************************************
|
|
* CONSTANTS
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*********************************************************************
|
|
* TYPEDEFS
|
|
*/
|
|
|
|
/*********************************************************************
|
|
* GLOBAL VARIABLES
|
|
*/
|
|
|
|
// Thermometer service
|
|
CONST uint8 thermometerServUUID[ATT_BT_UUID_SIZE] =
|
|
{
|
|
LO_UINT16(THERMOMETER_SERV_UUID), HI_UINT16(THERMOMETER_SERV_UUID)
|
|
};
|
|
|
|
// Thermometer temperature characteristic
|
|
CONST uint8 thermometerTempUUID[ATT_BT_UUID_SIZE] =
|
|
{
|
|
LO_UINT16(THERMOMETER_TEMP_UUID), HI_UINT16(THERMOMETER_TEMP_UUID)
|
|
};
|
|
|
|
// Thermometer Site
|
|
CONST uint8 thermometerTypeUUID[ATT_BT_UUID_SIZE] =
|
|
{
|
|
LO_UINT16(THERMOMETER_TYPE_UUID), HI_UINT16(THERMOMETER_TYPE_UUID)
|
|
};
|
|
|
|
// Thermometer Immediate Measurement
|
|
CONST uint8 thermometerImeasUUID[ATT_BT_UUID_SIZE] =
|
|
{
|
|
LO_UINT16(THERMOMETER_IMEAS_UUID), HI_UINT16(THERMOMETER_IMEAS_UUID)
|
|
};
|
|
|
|
// Thermometer Measurement Interval
|
|
CONST uint8 thermometerIntervalUUID[ATT_BT_UUID_SIZE] =
|
|
{
|
|
LO_UINT16(THERMOMETER_INTERVAL_UUID), HI_UINT16(THERMOMETER_INTERVAL_UUID)
|
|
};
|
|
|
|
// Thermometer Test Commands
|
|
CONST uint8 thermometerIRangeUUID[ATT_BT_UUID_SIZE] =
|
|
{
|
|
LO_UINT16(THERMOMETER_IRANGE_UUID), HI_UINT16(THERMOMETER_IRANGE_UUID)
|
|
};
|
|
|
|
|
|
/*********************************************************************
|
|
* EXTERNAL VARIABLES
|
|
*/
|
|
|
|
/*********************************************************************
|
|
* EXTERNAL FUNCTIONS
|
|
*/
|
|
|
|
/*********************************************************************
|
|
* LOCAL VARIABLES
|
|
*/
|
|
|
|
static thermometerServiceCB_t thermometerServiceCB;
|
|
|
|
/*********************************************************************
|
|
* Profile Attributes - variables
|
|
*/
|
|
|
|
// Thermometer Service attribute
|
|
static CONST gattAttrType_t thermometerService = { ATT_BT_UUID_SIZE, thermometerServUUID };
|
|
|
|
// Client Characteristic configuration. Each client has its own instantiation
|
|
// of the Client Characteristic Configuration. Reads of the Client Characteristic
|
|
// Configuration only shows the configuration for that client and writes only
|
|
// affect the configuration of that client.
|
|
|
|
// Thermometer Temperature Characteristic
|
|
static uint8 thermometerTempProps = GATT_PROP_INDICATE;
|
|
static uint8 thermometerTemp = 0;
|
|
static gattCharCfg_t thermometerTempConfig[GATT_MAX_NUM_CONN];
|
|
static uint8 thermometerTempFormat = 12;
|
|
|
|
// Site
|
|
static uint8 thermometerTypeProps = GATT_PROP_READ;
|
|
static uint8 thermometerType = 0;
|
|
|
|
// Intermediate Measurement
|
|
static uint8 thermometerImeasProps = GATT_PROP_NOTIFY;
|
|
static uint8 thermometerImeas=0;
|
|
static gattCharCfg_t thermometerIMeasConfig[GATT_MAX_NUM_CONN];
|
|
|
|
// Measurement Interval
|
|
static uint8 thermometerIntervalProps = GATT_PROP_INDICATE|GATT_PROP_READ|GATT_PROP_WRITE;
|
|
static uint8 thermometerInterval=30; //default
|
|
static gattCharCfg_t thermometerIntervalConfig[GATT_MAX_NUM_CONN];
|
|
|
|
// Measurement Interval Range
|
|
static thermometerIRange_t thermometerIRange = {1,60};
|
|
|
|
/*********************************************************************
|
|
* Profile Attributes - Table
|
|
*/
|
|
|
|
static gattAttribute_t thermometerAttrTbl[] =
|
|
{
|
|
// Thermometer Service
|
|
{
|
|
{ ATT_BT_UUID_SIZE, primaryServiceUUID }, /* type */
|
|
GATT_PERMIT_READ, /* permissions */
|
|
0, /* handle */
|
|
(uint8 *)&thermometerService /* pValue */
|
|
},
|
|
|
|
|
|
// TEMPERATURE
|
|
// 1. Characteristic Declaration
|
|
{
|
|
{ ATT_BT_UUID_SIZE, characterUUID },
|
|
GATT_PERMIT_READ,
|
|
0,
|
|
&thermometerTempProps
|
|
},
|
|
|
|
// 2. Characteristic Value
|
|
{
|
|
{ ATT_BT_UUID_SIZE, thermometerTempUUID },
|
|
0,
|
|
0,
|
|
&thermometerTemp
|
|
},
|
|
|
|
// 3. Characteristic Configuration
|
|
{
|
|
{ ATT_BT_UUID_SIZE, clientCharCfgUUID },
|
|
GATT_PERMIT_READ | GATT_PERMIT_WRITE,
|
|
0,
|
|
(uint8 *)&thermometerTempConfig
|
|
},
|
|
// 4. Presentation Format
|
|
{
|
|
{ ATT_BT_UUID_SIZE, charFormatUUID },
|
|
GATT_PERMIT_READ,
|
|
0,
|
|
(uint8 *)&thermometerTempFormat
|
|
},
|
|
|
|
// MEASUREMENT TYPE
|
|
|
|
// 5. Characteristic Declaration
|
|
{
|
|
{ ATT_BT_UUID_SIZE, characterUUID },
|
|
GATT_PERMIT_READ,
|
|
0,
|
|
&thermometerTypeProps
|
|
},
|
|
|
|
// 6. Characteristic Value
|
|
{
|
|
{ ATT_BT_UUID_SIZE, thermometerTypeUUID },
|
|
GATT_PERMIT_READ,
|
|
0,
|
|
&thermometerType
|
|
},
|
|
|
|
// IMMEDIATE MEASUREMENT
|
|
|
|
// 7. Characteristic Declaration
|
|
{
|
|
{ ATT_BT_UUID_SIZE, characterUUID },
|
|
GATT_PERMIT_READ,
|
|
0,
|
|
&thermometerImeasProps
|
|
},
|
|
|
|
// 8. Characteristic Value
|
|
{
|
|
{ ATT_BT_UUID_SIZE, thermometerImeasUUID },
|
|
0,
|
|
0,
|
|
&thermometerImeas
|
|
},
|
|
|
|
// 9. Characteristic Configuration
|
|
{
|
|
{ ATT_BT_UUID_SIZE, clientCharCfgUUID },
|
|
GATT_PERMIT_READ | GATT_PERMIT_WRITE,
|
|
0,
|
|
(uint8 *)&thermometerIMeasConfig
|
|
},
|
|
|
|
// INTERVAL
|
|
|
|
// 10. Characteristic Declaration
|
|
{
|
|
{ ATT_BT_UUID_SIZE, characterUUID },
|
|
GATT_PERMIT_READ,
|
|
0,
|
|
&thermometerIntervalProps
|
|
},
|
|
|
|
// 11. Characteristic Value
|
|
{
|
|
{ ATT_BT_UUID_SIZE, thermometerIntervalUUID },
|
|
GATT_PERMIT_READ | GATT_PERMIT_AUTHEN_WRITE,
|
|
0,
|
|
&thermometerInterval
|
|
},
|
|
// 12. Characteristic Configuration
|
|
{
|
|
{ ATT_BT_UUID_SIZE, clientCharCfgUUID },
|
|
GATT_PERMIT_READ | GATT_PERMIT_WRITE,
|
|
0,
|
|
(uint8 *)&thermometerIntervalConfig
|
|
},
|
|
// 13. Interval Range
|
|
{
|
|
{ ATT_BT_UUID_SIZE, thermometerIRangeUUID },
|
|
GATT_PERMIT_READ,
|
|
0,
|
|
(uint8 *)&thermometerIRange
|
|
},
|
|
};
|
|
|
|
/*********************************************************************
|
|
* LOCAL FUNCTIONS
|
|
*/
|
|
static uint8 thermometer_ReadAttrCB( uint16 connHandle, gattAttribute_t *pAttr,
|
|
uint8 *pValue, uint8 *pLen, uint16 offset, uint8 maxLen );
|
|
static bStatus_t thermometer_WriteAttrCB( uint16 connHandle, gattAttribute_t *pAttr,
|
|
uint8 *pValue, uint8 len, uint16 offset );
|
|
|
|
static void thermometer_HandleConnStatusCB( uint16 connHandle, uint8 changeType );
|
|
|
|
/*********************************************************************
|
|
* PROFILE CALLBACKS
|
|
*/
|
|
// Thermometer Service Callbacks
|
|
CONST gattServiceCBs_t thermometerCBs =
|
|
{
|
|
thermometer_ReadAttrCB, // Read callback function pointer
|
|
thermometer_WriteAttrCB, // Write callback function pointer
|
|
NULL // Authorization callback function pointer
|
|
};
|
|
|
|
/*********************************************************************
|
|
* PUBLIC FUNCTIONS
|
|
*/
|
|
|
|
/*********************************************************************
|
|
* @fn Thermometer_AddService
|
|
*
|
|
* @brief Initializes the Thermometer service by registering
|
|
* GATT attributes with the GATT server.
|
|
*
|
|
* @param services - services to add. This is a bit map and can
|
|
* contain more than one service.
|
|
*
|
|
* @return Success or Failure
|
|
*/
|
|
bStatus_t Thermometer_AddService( uint32 services )
|
|
{
|
|
uint8 status = SUCCESS;
|
|
|
|
// Initialize Client Characteristic Configuration attributes
|
|
GATTServApp_InitCharCfg( INVALID_CONNHANDLE, thermometerTempConfig );
|
|
GATTServApp_InitCharCfg( INVALID_CONNHANDLE, thermometerIMeasConfig );
|
|
GATTServApp_InitCharCfg( INVALID_CONNHANDLE, thermometerIntervalConfig );
|
|
|
|
// Register with Link DB to receive link status change callback
|
|
VOID linkDB_Register( thermometer_HandleConnStatusCB );
|
|
|
|
if ( services & THERMOMETER_SERVICE )
|
|
{
|
|
// Register GATT attribute list and CBs with GATT Server App
|
|
status = GATTServApp_RegisterService( thermometerAttrTbl,
|
|
GATT_NUM_ATTRS( thermometerAttrTbl ),
|
|
&thermometerCBs );
|
|
}
|
|
|
|
return ( status );
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn Thermometer_Register
|
|
*
|
|
* @brief Register a callback function with the Thermometer Service.
|
|
*
|
|
* @param pfnServiceCB - Callback function.
|
|
*
|
|
* @return None.
|
|
*/
|
|
extern void Thermometer_Register( thermometerServiceCB_t pfnServiceCB )
|
|
{
|
|
thermometerServiceCB = pfnServiceCB;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn Thermometer_SetParameter
|
|
*
|
|
* @brief Set a thermomter parameter.
|
|
*
|
|
* @param param - Profile parameter ID
|
|
* @param len - length of data to right
|
|
* @param value - pointer to data to write. This is dependent on
|
|
* the parameter ID and WILL be cast to the appropriate
|
|
* data type (example: data type of uint16 will be cast to
|
|
* uint16 pointer).
|
|
*
|
|
* @return bStatus_t
|
|
*/
|
|
bStatus_t Thermometer_SetParameter( uint8 param, uint8 len, void *value )
|
|
{
|
|
bStatus_t ret = SUCCESS;
|
|
switch ( param )
|
|
{
|
|
|
|
case THERMOMETER_TYPE:
|
|
thermometerType = *((uint8*)value);
|
|
break;
|
|
|
|
case THERMOMETER_INTERVAL:
|
|
thermometerInterval = *((uint8*)value);
|
|
break;
|
|
|
|
case THERMOMETER_TEMP_CHAR_CFG:
|
|
// Need connection handle
|
|
//thermometerTempConfig.value = *((uint8*)value);
|
|
break;
|
|
|
|
case THERMOMETER_IMEAS_CHAR_CFG:
|
|
// Need connection handle
|
|
//thermometerIMeasConfig.value = *((uint8*)value);
|
|
break;
|
|
|
|
case THERMOMETER_INTERVAL_CHAR_CFG:
|
|
// Need connection handle
|
|
//thermometerIntervalConfig.value = *((uint8*)value);
|
|
break;
|
|
|
|
case THERMOMETER_IRANGE:
|
|
thermometerIRange = *((thermometerIRange_t*)value);
|
|
break;
|
|
|
|
default:
|
|
ret = INVALIDPARAMETER;
|
|
break;
|
|
}
|
|
|
|
return ( ret );
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn Thermometer_GetParameter
|
|
*
|
|
* @brief Get a Thermometer parameter.
|
|
*
|
|
* @param param - Profile parameter ID
|
|
* @param value - pointer to data to get. This is dependent on
|
|
* the parameter ID and WILL be cast to the appropriate
|
|
* data type (example: data type of uint16 will be cast to
|
|
* uint16 pointer).
|
|
*
|
|
* @return bStatus_t
|
|
*/
|
|
bStatus_t Thermometer_GetParameter( uint8 param, void *value )
|
|
{
|
|
bStatus_t ret = SUCCESS;
|
|
|
|
switch ( param )
|
|
{
|
|
case THERMOMETER_TYPE:
|
|
*((uint8*)value) = thermometerType;
|
|
break;
|
|
|
|
case THERMOMETER_INTERVAL:
|
|
*((uint8*)value) = thermometerInterval;
|
|
break;
|
|
|
|
case THERMOMETER_IRANGE:
|
|
*((thermometerIRange_t*)value) = thermometerIRange;
|
|
break;
|
|
|
|
case THERMOMETER_TEMP_CHAR_CFG:
|
|
// Need connection handle
|
|
//*((uint16*)value) = thermometerTempConfig.value;
|
|
break;
|
|
|
|
case THERMOMETER_IMEAS_CHAR_CFG:
|
|
// Need connection handle
|
|
//*((uint16*)value) = thermometerIMeasConfig.value;
|
|
break;
|
|
|
|
case THERMOMETER_INTERVAL_CHAR_CFG:
|
|
// Need connection handle
|
|
//*((uint16*)value) = thermometerIntervalConfig.value;
|
|
break;
|
|
|
|
default:
|
|
ret = INVALIDPARAMETER;
|
|
break;
|
|
}
|
|
|
|
return ( ret );
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn Thermometer_TempIndicate
|
|
*
|
|
* @brief Send a indication containing a thermometer
|
|
* measurement.
|
|
*
|
|
* @param connHandle - connection handle
|
|
* @param pNoti - pointer to notification structure
|
|
*
|
|
* @return Success or Failure
|
|
*/
|
|
bStatus_t Thermometer_TempIndicate( uint16 connHandle, attHandleValueInd_t *pNoti,uint8 taskId )
|
|
{
|
|
uint16 value = GATTServApp_ReadCharCfg( connHandle, thermometerTempConfig );
|
|
|
|
// If indications enabled
|
|
if ( value & GATT_CLIENT_CFG_INDICATE )
|
|
{
|
|
// Set the handle (uses stored relative handle to lookup actual handle)
|
|
pNoti->handle = thermometerAttrTbl[pNoti->handle].handle;
|
|
|
|
// Send the Indication
|
|
return GATT_Indication( connHandle, pNoti, FALSE, taskId );
|
|
}
|
|
|
|
return bleIncorrectMode;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn Thermometer_IntervalIndicate
|
|
*
|
|
* @brief Send a interval change indication
|
|
*
|
|
* @param connHandle - connection handle
|
|
* @param pNoti - pointer to notification structure
|
|
*
|
|
* @return Success or Failure
|
|
*/
|
|
bStatus_t Thermometer_IntervalIndicate( uint16 connHandle, attHandleValueInd_t *pNoti,uint8 taskId )
|
|
{
|
|
uint16 value = GATTServApp_ReadCharCfg( connHandle, thermometerIntervalConfig );
|
|
|
|
// If indications enabled
|
|
if ( value & GATT_CLIENT_CFG_INDICATE )
|
|
{
|
|
// Set the handle (uses stored relative handle to lookup actual handle)
|
|
pNoti->handle = thermometerAttrTbl[pNoti->handle].handle;
|
|
|
|
// Send the Indication
|
|
return GATT_Indication( connHandle, pNoti, FALSE, taskId );
|
|
}
|
|
|
|
return bleIncorrectMode;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn Thermometer_IMeasNotify
|
|
*
|
|
* @brief Send a notification containing a thermometer
|
|
* measurement.
|
|
*
|
|
* @param connHandle - connection handle
|
|
* @param pNoti - pointer to notification structure
|
|
*
|
|
* @return Success or Failure
|
|
*/
|
|
bStatus_t Thermometer_IMeasNotify( uint16 connHandle, attHandleValueNoti_t *pNoti)
|
|
{
|
|
uint16 value = GATTServApp_ReadCharCfg( connHandle, thermometerIMeasConfig );
|
|
|
|
// If notifications enabled
|
|
if ( value & GATT_CLIENT_CFG_NOTIFY )
|
|
{
|
|
// Set the handle
|
|
pNoti->handle = thermometerAttrTbl[THERMOMETER_IMEAS_VALUE_POS].handle;
|
|
|
|
// Send the Notification
|
|
return GATT_Notification( connHandle, pNoti, FALSE );
|
|
}
|
|
|
|
return bleIncorrectMode;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn thermometer_ReadAttrCB
|
|
*
|
|
* @brief Read an attribute.
|
|
*
|
|
* @param connHandle - connection message was received on
|
|
* @param pAttr - pointer to attribute
|
|
* @param pValue - pointer to data to be read
|
|
* @param pLen - length of data to be read
|
|
* @param offset - offset of the first octet to be read
|
|
* @param maxLen - maximum length of data to be read
|
|
*
|
|
* @return Success or Failure
|
|
*/
|
|
static uint8 thermometer_ReadAttrCB( uint16 connHandle, gattAttribute_t *pAttr,
|
|
uint8 *pValue, uint8 *pLen, uint16 offset, uint8 maxLen )
|
|
{
|
|
bStatus_t status = SUCCESS;
|
|
|
|
// If attribute permissions require authorization to read, return error
|
|
if ( gattPermitAuthorRead( pAttr->permissions ) )
|
|
{
|
|
// Insufficient authorization
|
|
return ( ATT_ERR_INSUFFICIENT_AUTHOR );
|
|
}
|
|
|
|
// Make sure it's not a blob operation (no attributes in the profile are long)
|
|
if ( offset > 0 )
|
|
{
|
|
return ( ATT_ERR_ATTR_NOT_LONG );
|
|
}
|
|
|
|
if ( pAttr->type.len == ATT_BT_UUID_SIZE )
|
|
{
|
|
// 16-bit UUID
|
|
uint16 uuid = BUILD_UINT16( pAttr->type.uuid[0], pAttr->type.uuid[1]);
|
|
switch ( uuid )
|
|
{
|
|
case THERMOMETER_TYPE_UUID:
|
|
*pLen = THERMOMETER_TYPE_LEN;
|
|
VOID osal_memcpy( pValue, &thermometerType, THERMOMETER_TYPE_LEN ) ;
|
|
break;
|
|
|
|
case THERMOMETER_INTERVAL_UUID:
|
|
*pLen = THERMOMETER_INTERVAL_LEN;
|
|
VOID osal_memcpy( pValue, &thermometerInterval, THERMOMETER_INTERVAL_LEN ) ;
|
|
break;
|
|
|
|
case THERMOMETER_IRANGE_UUID:
|
|
*pLen = THERMOMETER_IRANGE_LEN;
|
|
VOID osal_memcpy( pValue, &thermometerIRange, THERMOMETER_IRANGE_LEN ) ;
|
|
break;
|
|
|
|
default:
|
|
*pLen = 0;
|
|
status = ATT_ERR_ATTR_NOT_FOUND;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ( status );
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn thermometer_WriteAttrCB
|
|
*
|
|
* @brief Validate attribute data prior to a write operation
|
|
*
|
|
* @param connHandle - connection message was received on
|
|
* @param pAttr - pointer to attribute
|
|
* @param pValue - pointer to data to be written
|
|
* @param len - length of data
|
|
* @param offset - offset of the first octet to be written
|
|
*
|
|
* @return Success or Failure
|
|
*/
|
|
static bStatus_t thermometer_WriteAttrCB( uint16 connHandle, gattAttribute_t *pAttr,
|
|
uint8 *pValue, uint8 len, uint16 offset )
|
|
{
|
|
bStatus_t status = SUCCESS;
|
|
|
|
uint16 uuid = BUILD_UINT16( pAttr->type.uuid[0], pAttr->type.uuid[1]);
|
|
switch ( uuid )
|
|
{
|
|
case GATT_CLIENT_CHAR_CFG_UUID:
|
|
// Validate/Write Temperature measurement setting
|
|
if ( pAttr->handle == thermometerAttrTbl[THERMOMETER_TEMP_CHAR_CONFIG_POS].handle )
|
|
{
|
|
status = GATTServApp_ProcessCCCWriteReq( connHandle, pAttr, pValue, len,
|
|
offset, GATT_CLIENT_CFG_INDICATE );
|
|
if ( status == SUCCESS )
|
|
{
|
|
uint16 value = BUILD_UINT16( pValue[0], pValue[1] );
|
|
|
|
(*thermometerServiceCB)( (value == GATT_CFG_NO_OPERATION) ?
|
|
THERMOMETER_TEMP_IND_DISABLED :
|
|
THERMOMETER_TEMP_IND_ENABLED );
|
|
}
|
|
}
|
|
// Validate/Write Intermediate measurement setting
|
|
else if ( pAttr->handle == thermometerAttrTbl[THERMOMETER_IMEAS_CHAR_CONFIG_POS].handle )
|
|
{
|
|
status = GATTServApp_ProcessCCCWriteReq( connHandle, pAttr, pValue, len,
|
|
offset, GATT_CLIENT_CFG_NOTIFY );
|
|
if ( status == SUCCESS )
|
|
{
|
|
uint16 value = BUILD_UINT16( pValue[0], pValue[1] );
|
|
|
|
// Notify application
|
|
(*thermometerServiceCB)( (value == GATT_CFG_NO_OPERATION) ?
|
|
THERMOMETER_IMEAS_NOTI_DISABLED :
|
|
THERMOMETER_IMEAS_NOTI_ENABLED);
|
|
}
|
|
}
|
|
// Validate/Write Interval Client Char Config
|
|
else if ( pAttr->handle == thermometerAttrTbl[THERMOMETER_INTERVAL_CHAR_CONFIG_POS].handle )
|
|
{
|
|
status = GATTServApp_ProcessCCCWriteReq( connHandle, pAttr, pValue, len,
|
|
offset, GATT_CLIENT_CFG_INDICATE );
|
|
if ( status == SUCCESS )
|
|
{
|
|
uint16 value = BUILD_UINT16( pValue[0], pValue[1] );
|
|
|
|
// Notify application
|
|
(*thermometerServiceCB)( (value == GATT_CFG_NO_OPERATION) ?
|
|
THERMOMETER_INTERVAL_IND_DISABLED :
|
|
THERMOMETER_INTERVAL_IND_ENABLED);
|
|
}
|
|
else
|
|
{
|
|
status = ATT_ERR_INVALID_HANDLE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
status = ATT_ERR_INVALID_VALUE_SIZE;
|
|
}
|
|
break;
|
|
|
|
case THERMOMETER_INTERVAL_UUID:
|
|
// Validate the value
|
|
// Make sure it's not a blob oper
|
|
if ( offset == 0 )
|
|
{
|
|
if ( len != THERMOMETER_INTERVAL_LEN )
|
|
status = ATT_ERR_INVALID_VALUE_SIZE;
|
|
}
|
|
else
|
|
{
|
|
status = ATT_ERR_ATTR_NOT_LONG;
|
|
}
|
|
|
|
//validate range
|
|
if ((*pValue >= thermometerIRange.high) | ((*pValue <= thermometerIRange.low) & (*pValue != 0)))
|
|
{
|
|
status = ATT_ERR_INVALID_VALUE;
|
|
}
|
|
|
|
//Write the value
|
|
if ( status == SUCCESS )
|
|
{
|
|
uint8 *pCurValue = (uint8 *)pAttr->pValue;
|
|
// *pCurValue = *pValue;
|
|
VOID osal_memcpy( pCurValue, pValue, THERMOMETER_INTERVAL_LEN ) ;
|
|
|
|
//notify application of write
|
|
(*thermometerServiceCB)(THERMOMETER_INTERVAL_SET);
|
|
|
|
}
|
|
break;
|
|
|
|
default:
|
|
status = ATT_ERR_ATTR_NOT_FOUND;
|
|
break;
|
|
}
|
|
|
|
return ( status );
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* @fn thermometer_HandleConnStatusCB
|
|
*
|
|
* @brief Simple Profile link status change handler function.
|
|
*
|
|
* @param connHandle - connection handle
|
|
* @param changeType - type of change
|
|
*
|
|
* @return none
|
|
*/
|
|
static void thermometer_HandleConnStatusCB( uint16 connHandle, uint8 changeType )
|
|
{
|
|
// Make sure this is not loopback connection
|
|
if ( connHandle != LOOPBACK_CONNHANDLE )
|
|
{
|
|
// Reset Client Char Config if connection has dropped
|
|
if ( ( changeType == LINKDB_STATUS_UPDATE_REMOVED ) ||
|
|
( ( changeType == LINKDB_STATUS_UPDATE_STATEFLAGS ) &&
|
|
( !linkDB_Up( connHandle ) ) ) )
|
|
{
|
|
GATTServApp_InitCharCfg( connHandle, thermometerTempConfig );
|
|
GATTServApp_InitCharCfg( connHandle, thermometerIMeasConfig );
|
|
GATTServApp_InitCharCfg( connHandle, thermometerIntervalConfig );
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*********************************************************************/
|